iTechworld Complete Ute Dual Battery Kit 120Ah Lithium
WHY BUY FROM US:
Get tailored advice for your power needs
✓ Talk to an Expert: 1300 627 685
✓ Free Shipping Australia Wide
✓ 30 Day Returns
✓ Price Beat Guarantee
✓ Lifetime Customer Support
Need reliable ute power? iTechworld Complete Ute Dual Battery Kit 120Ah Lithium keeps you charged off-grid.
The iTechworld Complete Ute Dual Battery Kit 120Ah Lithium is made for ute owners who need dependable power on the move. It is ideal for camping, touring, trade work or everyday 12V setups.
With 120Ah of lithium power, this kit helps keep your fridge, lights, phone chargers and other essential gear running when you are away from mains power. It also helps protect your starter battery, so you can enjoy your setup with more confidence.
The iTechworld Complete Ute Dual Battery Kit gives you a practical way to build a reliable dual battery system in your ute. It is a great option for canopy setups, weekend adventures and worksites where extra power makes life easier.
If you want a simple, capable and travel-ready power solution, this kit is a smart choice. It helps you stay powered for longer, so you can focus on the job, the journey or the campsite.
PACKAGE CONTENTS
- 1x iTECH120X PRO with Bluetooth 120Ah Lithium 12v Battery
- 1x User Guide
WARRANTY & SUPPORT
The iTECH120X PRO with Bluetooth warranty is 5 years (3 years full replacement 2 years pro-rata).
*Storage deep cycle battery only. It cannot be used as a cranking battery.
iTECH120X PRO 120Ah Lithium LiFePO₄ Battery Specifications
| Dimensions (LxWxH): | 330 x 173 x 215mm |
| Weight: | 13.2kg |
| Voltage: | 12V |
| Nominal voltage | 12.8V |
| C20 rating usable Amps: | 120Ah |
| Short circuit protection: | Yes |
| Optimum temperature range: | 5°C ~ 60°C |
| BMS operational temperature range: | 5°C ~ 80°C |
| Safety protection isolator: | 80°C |
| Recommended charge voltage: | 14.4V |
| Maximum charge current: | 100A |
| BMS charge cutoff: | 15V |
| BMS low voltage cutoff: | 10.5V |
| Series connection: | Up to 48V (4 x batteries) |
| Parallel connection: | Unlimited |
| Life cycles @ 80% depth of discharge: | 5,000+ |
| Life cycles @ 40% depth of discharge: | 10,000+ |
| Continuous Discharge Rate: | 150A |
| Maximum Discharge Rate (5 Seconds): | 430A |
| Terminal type: | M8 |
| Case material: | ABS |
1000W Pure Sine Wave Inverter Specifications
| Maximum continuous output | 1000W |
| Peak output: | 2000W |
| Battery compatibility: | Standard lead-acid, AGM, Gel or LiFePO4 |
| Input voltage range: | 10.5-15.5V |
| Output plug rating: | 10A |
| Output voltage & current: | 240V - 50Hz |
| No load draw | <1.2A |
| Efficiency: | 88% |
| Output waveform: | Pure Sine Wave |
| Total Harmonic Distotion (THD): | <3% |
| IP rating: | IP22 |
| Operating temperature: | -10°C ~ 50°C |
| Storage temperature | -30°C ~ 70°C |
| Over voltage protection: | 15.5±0.2V DC |
| Under voltage protection: | 10.5±0.2V DC |
| Short circuit protection: | 1 second |
| Dimensions (LxWxH): | 353 x 204 x 81mm |
| Safety certifications: | The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations |
| Weight: | 2.5kg |
iTECHBM500 Battery Monitor with 500A Shunt Specifications
| Supply voltage: | 10-100V |
| Battery capacity: | 10-999Ah |
| Maximum measured current: | 500A |
| Power consumption (screen off): | <2mA |
| Power consumption (screen brightness @ 10%): | <20mA |
| Power consumption (screen brightness @ 100%): | <60mA |
| Voltage accuracy: | ±1% |
| Current accuracy: | ±1% |
| Operating temperature: | -20°C ~ 80°C |
| Exterior bracket dimensions (LxWxH): | 106 x 81 x 18mm |
| Mounting bracket points (LxW): | 95 x 70mm |
| Monitor backing dimensions (LxWxH): | 80 x 59 x 16mm |
| IP rating: | IP20 |
iTECHDCDC25 25A DCDC + MPPT Charger Specifications
| Battery capacity: | 50-500Ah |
| Vehicle input voltage: | 9-32V |
| Solar input voltage: | 10-32V |
| Maximum input current: | 25A |
| Input fuse rating: | 40A |
| Continuous output current: | Up to 25A |
| Output fuse rating: | 40A |
| Minimum auxiliary battery charge start voltage | 4V |
| Standby current: | <10mA |
| Battery type: | Standard lead-acid, Gel, AGM, Calcium & LiFePO4 |
| Operating temperature: | -20°C ~ 80°C |
| IP rating: | IP67 |
| Dimensions (LxWxH): | 150 x 127 x 39mm |
| Weight: | 670g |
iTECHBC25 AC Charger Specifications
| AC input voltage: | 220-240V |
| AC input frequency: | 50-60Hz |
| Maximum input current: | 3A |
| Maximum input power: | 440W |
| Continuous output current: | Up to 25A |
| Output fuse rating: | 1 x 40A |
| Minimum auxiliary battery voltage: | 0V |
| Standby current | <2mA |
| Battery type: | Standard lead-acid, Gel, AGM, Calcium & LiFePO4 |
| Operating temperature: | -20°C ~ 60°C |
| IP rating: | IP20 |
| Dimensions | 275 x 190 x 72mm |
| Weight: | 2kg |
